Power hungry modules

Moderator: chester

Power hungry modules

Postby dsmythe » 06 Mar 2015, 17:52

If your Mark 5 is OK with only one bank powered up, but sometimes has problems with power to both banks:

Unplug the green power connector on the back of the chassis backplane.
Tighten the screws on the green connector (if they are not already tight).
Plug the connector back in.

The torque specification for the screws on the
green power connector is 0.5 Nm.
dsmythe
 
Posts: 2
Joined: 23 Jul 2014, 18:00
Location: Westford, MA
Organization: MIT Haystack Observatory
Name: Dan Smythe

Return to Mark5

Who is online

Users browsing this forum: No registered users and 1 guest

cron